www.sptnews.ca

Networking
Termination Pod with complete field kit

Platinum Tools will feature the new EZ-RJPRO Termination Pod, a complete turnkey field kit (P/N 90173), during 2015 ISC West, held in Las Vegas, Nev. from April 15-17 at the Sands Expo and Convention Center, booth 5036. 


March 20, 2015
By Staff

“Our new EZ-RJPRO Termination Pod is designed for the professional installer providing everything he needs for consistent, repeatable terminations and overall quicker and easier installations,” explained John Phillips, Platinum Tools, Inc. product manager. “This versatile kit has the right assortment of both tools and connectors making it the perfect solution when working with Cat5e, Cat6, and Cat3, as well. With the EZ-RJPRO Termination Pod, the installer can be assured that every termination will meet FCC specifications”.

The “EZ” crimp & trim, modular plug termination kit Includes:
•    EZ-RJPRO HD Crimp Tool – P/N 100054
•    Cat5e/6 Cable Jacket Stripper – P/N 15015
•    Electrician’s Scissors – P/N 10517
•    EZ-RJ45 Cat5e connectors (100 each) – P/N 105003
•    EZ-RJ45 Cat6 connectors (100 each) – P/N 105004
•    EZ-RJ12/11 connectors (50 each) – P/N 105005

EZ-RJPRO HD Crimp Tool – P/N 100054
The EZ-RJPRO HD Crimp Tool uses the EZRJ45 patented ‘crimp & trim’ system and is designed to handle larger dimensional size cables. Compatible with all EZ-RJ45 and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP.

Cat5e/6 Cable Jacket Stripper – P/N 15015
This economical tool has been specifically designed to strip the cable jackets from Category 5, 5e, and Category 6 twisted pair cables. No adjustments are required and will not nick the inner conductors. Durable high impact plastic housing is molded from yellow plastic to make it easier to locate. Long life blade.

Electrician’s Scissors – P/N 10517
Our Scissor-Run Scissors are an original favorite. This smooth cutting action, scissor-run design, is excellent for cutting Kevlar, foil, and wire. Cuts wire up to 16 AWG solid, 12 AWG stranded, and will strip 19 AWG and 23 AWG. Includes full serrated bottom blade for non-slip cutting; through hardened, high carbon steel for edge retention; double plated chrome over nickel; easily re-sharpens and holds cutting edge; scraper and file on backside of blades.

EZ-RJ45 Cat5e connectors (100 each) – P/N 105003
The patented EZ-RJ45 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Made in the USA. Patented.

EZ-RJ45 Cat6 connectors (100 each) – P/N 105004
The new patented EZ-RJ45 Cat6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Made in the USA. Patented.

EZ-RJ12/11 connectors (50 each) – P/N 105005
The new, patented EZ-RJ12/11 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order prior to termination. Use the EZ-RJPRO HD Crimp Tool (P/N 100054) for single cycle crimping and trimming of the excess wire. FCC compliant and UL rated. Made in the USA. Patented.


Print this page

Related

Tags



Leave a Reply

Your email address will not be published. Required fields are marked *

*