Magnalight.com by Larson Electronics announces addition of high powered LED blasting light
The Magnalight BL40-LED Blasting Light from Larson Electronics is a high-powered LED blasting light capable of withstanding the conditions found in sand, water, and media blasting operations.
This IP68 rated 120 watt LED blasting light produces 7,200 lumens of intense light, is waterproof to three metres, corrosion resistant, available in spot or flood configurations and can be operated with voltages ranging from 9 to 46 volts. An optional inline transformer allows operation with a standard 120V-277V AC current, and a magnetic mounting system allows users to attach the unit to any metallic surface containing steel or iron.
Built to withstand operations in extreme conditions, the BL40-LED Blasting Light offers a powerful LED light beam capable of cutting through the dusty and murky conditions often encountered in blasting rooms. Dust-proof and IP68-rated waterproof to three metres, this LED light contains 40, 3 watt Edixeon® 3 Watt LED Emitters producing 7,200 lumens and can withstand exposure to sand, water, dust and high vibratory conditions without failures or loss of light output. Three 100-pound grip magnetic mounts provide secure attachment to metallic surfaces, allowing users to mount the light to walls, ceilings, equipment and any surface that will accept a magnet. An adjustable trunnion connects the light fixture to the mounting magnets and provides nearly 360 degrees of vertical movement.
Constructed of extruded aluminum with a polycarbonate lens and stainless steel hardware, this LED light is resistant to damage from impacts and vibrations. Protective adhesive Mylar lens covers that can be peeled off and replaced easily are available to protect the lens faceplate and catch overspray in coating applications and reduce lens exposure to abrasives during blasting procedures. This LED blasting light operates on 9 to 42 volts DC, allowing it to be directly connected to any common vehicle or equipment electrical system without additional hardware. An optional inline transformer allows the unit to be operated with 120 to 277 volts AC, providing an even greater degree of versatility and convenience. The light is also offered in a spot beam or flood beam configuration to provide either a 1200-foot-long spot beam or 375-feet-long by 260-feet-wide flood beam. Included with this unit is 50 feet of SOOW cord, allowing for locating the light some distance from the power source. The Edixeon® 3 Watt LED Emitters in this unit are rated at 50,000 hours, allowing this unit to operate for several years without requiring a lamp replacement. The waterproof and dust-proof housing allows operators to simply wash down the unit, even with high pressure water jets, without worry of damaging the interior electronics.
Magnalight by Larson Electronics