Integration
News
Automation and security converge
Home
Automation, Inc. (HAI), based in
August 15, 2007 By Staff
HAI’s
2.15 controller firmware adds support for DSC PowerSeries alarm systems for the
Lumina and Lumina Pro home control systems. The Lumina and Lumina Pro DSC PowerSeries integration is over a serial
connection. The Lumina and Lumina Pro
support all DSC PowerSeries models and require either the DSC IT-100
integration module or DSC PC5401 serial adapter. The Lumina supports up to 32 security zones
from the DSC security panel and the Lumina Pro supports up to 64 security zones
from the DSC security panel.
the integration, the Lumina or Lumina Pro can trigger events from the DSC
security zones when they are opened or closed such as turning the foyer light
on when the front door is open if it is dark. The Lumina or Lumina Pro can also
trigger events when the DSC security system goes into alarm such as turning on
all inside and outside lights when a burglar or fire alarm is tripped.
energy efficiency, the Lumina or Lumina Pro can change modes when the DSC
security system is armed or disarmed. When leaving the house and arming the DSC alarm in the Away mode, the
Lumina or Lumina Pro will automatically set back thermostats and turn off
lights. Additionally the integration allows the arming or disarming of the DSC
security system over the Internet via HAI’s nap-Link software.
Print this page